Audi Collision Equipment Requirements

Sevenne XL Composition (5.8M/19’0”). It is the longer version of the Sevenne designed for vehicles like the Mercedes-Benz Sprinter and Jaguar XJ. V...

The Griffon XL is 5.8m/19’0” long and has a lifting capacity of 4200kg/9260lbs. It has a front lift to lift the front of the bench up and down for...

The Rhone L 4.2T is 5.0M/16’5” long and has a capacity of 4200kg/9259lbs. It has an under lift that allows you to raise and lower the bench to a c...

The Rhone L 4.2T is 5.0m/16’5” long and has a lifting capacity of 4200kg/9259lbs. It has an under lift that allows you to raise and lower the benc...

The Griffon 2.8T Evolution Double Drilled is 4.35m/14’3” long and has a lifting capacity of 2800kg/6172lbs. It features a centre lift for loading o...

The Griffon 2.8T Evolution VB is 4.35m/14’3” long and has a capacity of 2800kg/6172lbs. It features a centre lift for loading on to fixtures or Ca...

Sevenne is a universal mobile bench, which can be upgraded to Rhone or Griffon. The anchoring can be achieved all around the bench, thanks to its ...

Description Standard BMW Mercedes VAS The Invertaspot NG sets the benchmark for advanced car body repair technology with its superior features...

Spot Welding Machine with Inverter Technology Spot welder with Inverter Technology. Fully automatic function in standard-mode. Expert mode and Man...

The Celette Naja 3D electronic measuring system is one of the worlds most advanced and user-friendly measuring system in this industry. It is a si...

The new premium shielded arc welding device VAS821003 is the best solution for car body repair shops. Features: It helps you carry out high-qualit...

A set of 22 MZ towers for use with dedicated fixtures and Cameleon. Includes mobile storage trolley and one set of TV410 plates. Parts Included: MZ...

A set of 6 standard aluminum crossmembers including bolts and nuts for attaching to the bench.

A set of universal pistons for use with the newer 500 series dedicated jigs. MZ plus is also required for the Cameleon universal fixture sets. Come...

Required by Audi, VW, Bentley, BMW, Acura, and Honda The Celette Roll.100 is a heavy-duty trolley designed for moving damaged or disabled vehicles ...

The ALL-IN-ONE tool for the application-secure cutting at the car body outer skin. Outstanding in use for doors, boot edges, mudguards, and roof e...

C-arm No.3 for GT Spot Welder with curved C-Electrode. Tested and approved by, VW, Audi, Porsche, SEAT, Lamborghini, Bentley, Bugatti, Ford, Hyunda...

The WPS 3000 is a handy, powerful, and quiet professional body saw. Due to the remarkably low vibrations of 2.5 m/s² according to ISO 8662, the noi...

An essential auto body repair tool to add to your workshop tool box. Features for refinishing and beading of wheel arches for the beading of door...

Spot weld remover; universal for all cars. Especially designed for wide and deep profiles. Removes and opens spot-welds at the folds as well as se...

The double-holding device holds and controls door openings during repairs. The Celette Mechanical Double Holding Door Brace helps maintain the corr...

The Celette orientable engine holding device is used to hold the engine in place when dropping the engine cradle. It allows the height of engine to...

Celette pulling straps used for pulling B-pillars and rails in a safe manner to avoid damages.

To remove spot-welds: for all kind of body panels the perfect drill bit. Delivery Contents: 1 x BTR/BOR bit 3-cutting edges 8.0 x 44 mm 3 x Varian...

The Celette pulling flange makes the body repair work around and on the suspension strut tower is made considerably easier.

This hook is attached to a chain pulley and is used to give additional pulling angle. It allows multiple pulling angles anywhere around the frame b...

Kit Includes: Penetrant; SKL-SP2 Aerosol Developer; SKD-S2 Aerosol Nondestructive Testing Material; SKC-S Aerosol Penetrant; SKL-SP2 Aerosol: Re...

The Gas Regulator for Pro-Spot MIG Welders (82-7001) is a reliable and easy-to-use solution for precise gas flow control. It features two gauges: o...

The Celette pulling clamp is a medium size automatic clamp with no bolting needed, as the jaws self tighten during the pulling.

Perfect for the separating and removing of body panels with 2 knife edges: 1x longitudinal and 1x cross direction to open the panels after removing...

Welding wire on D-200 plastic roll made of aluminum-silicon alloy (aluminum cast alloys) for TIG or MIG welding of aluminum-silicon alloys. Appli...

Welding wire on D-200 plastic roll is made of aluminum-silicon alloy (aluminum cast alloys) for TIG or MIG welding of aluminum-silicon alloys. Ap...

This Cellete kit is an axle used between the pulling flange ATD.149 and the MZ system to reposition the strut tower correctly. Delivery Contents: ...

Our Thermo Control Stickers help you regulate temperatures when repairing aluminum surfaces. Its 6 temperature levels and efficient self-adhesive d...

CAMELEON CATALOGUE Cameleon Premium: CAM02.162, the Cameleon Premium comes with all accessories needed to fix a damaged car. This is a stand-alone ...