Audi Collision Equipment Requirements

Sevenne XL Composition (5.8M/19’0”). It is the longer version of the Sevenne designed for vehicles like the Mercedes-Benz Sprinter and Jaguar XJ. V...

The Griffon XL is 5.8m/19’0” long and has a lifting capacity of 4200kg/9260lbs. It has a front lift to lift the front of the bench up and down for...

The Rhone L 4.2T is 5.0M/16’5” long and has a capacity of 4200kg/9259lbs. It has an under lift that allows you to raise and lower the bench to a c...

The Rhone L 4.2T is 5.0m/16’5” long and has a lifting capacity of 4200kg/9259lbs. It has an under lift that allows you to raise and lower the benc...

The Griffon 2.8T Evolution Double Drilled is 4.35m/14’3” long and has a lifting capacity of 2800kg/6172lbs. It features a centre lift for loading o...

The Griffon 2.8T Evolution VB is 4.35m/14’3” long and has a capacity of 2800kg/6172lbs. It features a centre lift for loading on to fixtures or Ca...

Sevenne is a universal mobile bench, which can be upgraded to Rhone or Griffon. The anchoring can be achieved all around the bench, thanks to its ...

The Celette Naja 3D electronic measuring system is one of the worlds most advanced and user-friendly measuring system in this industry. It is a si...

A set of 22 MZ towers for use with dedicated fixtures and Cameleon. Includes mobile storage trolley and one set of TV410 plates. Parts Included: MZ...

A set of 6 standard aluminum crossmembers including bolts and nuts for attaching to the bench.

A set of universal pistons for use with the newer 500 series dedicated jigs. MZ plus is also required for the Cameleon universal fixture sets. Come...

Required by Audi, VW, Bentley, BMW, Acura, and Honda The Celette Roll.100 is a heavy-duty trolley designed for moving damaged or disabled vehicles ...

The double-holding device holds and controls door openings during repairs. The Celette Mechanical Double Holding Door Brace helps maintain the corr...

The Celette orientable engine holding device is used to hold the engine in place when dropping the engine cradle. It allows the height of engine to...

Celette pulling straps used for pulling B-pillars and rails in a safe manner to avoid damages.

The Celette pulling flange makes the body repair work around and on the suspension strut tower is made considerably easier.

This hook is attached to a chain pulley and is used to give additional pulling angle. It allows multiple pulling angles anywhere around the frame b...

The Celette pulling clamp is a medium size automatic clamp with no bolting needed, as the jaws self tighten during the pulling.

This Cellete kit is an axle used between the pulling flange ATD.149 and the MZ system to reposition the strut tower correctly. Delivery Contents: ...

CAMELEON CATALOGUE Cameleon Premium: CAM02.162, the Cameleon Premium comes with all accessories needed to fix a damaged car. This is a stand-alone ...