Mo-Clamp

Has a throat opening of 7 inches to get over, around and behind the damage. Multiple holes allow for various angle pulls. Includes swivel pad. Opti...

Most commonly used nuts, bolts, washers and clevis pins to repair and restore Mo-Clamp tools. A diagram on the box helps you immediately locate the...

Clamp has recessed pockets to hold bolts stationary for easy tightening. Includes #4043 Oval Loop. Technical Details: Gripping Surface: 4" wide (1...

One pair Frame Rack Dyna-mo jaws with 7" draw bar, one side pull bracket, shackle and oval loop. Raised "ears" to hold bolt in place while tighteni...

For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. Includes #210060 Horizontal Bracket and #210070 Vertica...

Alloy heat-treated hooks increase pulling options. May be used with #0810 and #0820 Hole Pull Plates to pull, or use in combination with clamps. Se...

Clamp has recessed pockets to hold bolts stationary for easy tightening. Includes #4043 Oval Loop. Technical Details: Gripping Surface: 4" wide (1...

Multi-purpose clamp with gator teeth for sure, non-slip pulls on any lip. Use the Lip Grip as a sandwich clamp on quarter panels or floor sections....

Mo-Clamp's new design Tight Opening Clamp has all the same gripping dimension requirements as the old design. Redesigned and strengthened with Mo-C...

One of Mo-Clamp's original self-tightening clamps. A must for every body man. 1½" wide bite for aggressive pulling. Original wedge. New angled toot...

Self-Tightening. Its 1 1/2" (39 mm) throat clearance fits over a flange or frame horn, or around a lip to pull from behind. Original wedge. Origina...

A prime component of a new generation of Mo-Clamps. Smaller and handier, but equipped with the same self-tightening grip you love. Equipped with a ...

Ever get really frustrated when you need a special sized hook and can't find it? Well, here's the newest in that family of holding devices. The Hoo...

Mo-Clamp 6506 5/16" Frame Chain 6' is manufactured in accordance with the NACM Specification for chain, ASTM Standard A391 and ASTM Standard A413 f...

Spring loaded for easy opening. Includes Oval Loop for use with Slip Hook for easy hook-up. For light sheet metal in those tight places. Cross-hatc...

This is used for hard-to-hold pulls. It's simple to use, just tack weld one of the reusable plates, attach clamp and pull. When finished, break the...

Used for the hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull, break tack weld with a grinding cut-off wheel or cutt...

Great for bolting to a frame, unibody rail or to other places to make a secure pull. Each bar has a combination of hole patterns to facilitate bolt...

Versatile combinations for quick hook-ups and multiple pulls. 18-inches of ⅜" chain included. Technical Details: Overall Length: 25" (635 mm) Wei...

For quick shortening of a ⅜" chain. Another time saving tool. Usually several is a good thing. Technical Details: Overall Length: 8 1/2" (222 mm) ...

Versatile combinations for quick hook-ups and multiple pulls. 18-inches of ⅜" chain included. Technical Details: Gripping Surface: 3" wide (76 mm)...

Quick tie-down for track systems or back anchoring on frame racks. Lip can be used for pulling damaged areas; varied multiple uses for chain length...

Chain too long? Make it shorter! Chain to short? Make it longer! Alloy heat-treated steel. Pulling slots can be used with #0900 Hole Pull Adapters....

The Panel Puller is light and easy to use with a slide hammer or pulling post. Use the Panel Puller on fender openings, deck lids, door posts and o...

Bolt to surface for a 90-degree straight pull or use with #4030 3-Way Pull Clamp, pair of #4025 Frame Rack Jaws or #4010 Frame Rack Unibody Clamp. ...

Protects area where chain may damage structure. Can be made into a cinch. Technical Details: Overall Length: 30" (762mm) Width: 3" (78mm) Weight:...

The Mo-Clamp 6313 Ford "T" Hook with Grab Hook is a heavy-duty tie-down perfect for use around the frame machine. It is made of steel and has a zin...

Versatile combinations for quick hook-ups and multiple pulls. 18-inches of ⅜" chain included. Technical Details: Overall Length: 5" (127 mm) Weig...

The Mo-Clamp 6311 Ford "T" Hook with chain is the original shipping tie down for Ford vehicles.Excellent around the frame machine to help hold a fr...

Restore your vehicle quickly and easily with this ergonomic tool. Designed for functionality, it effectively removes dents for a new and pristine l...