Products

Anti-static vacuum bag for dust free sanding systems.

Suction cup with pull release Loading capacity: 10kg / 22lbs Suction cup diameter: 75 mm or 3 inches Complete suction cup with the handle: 7 inche...

For spot weld removal on high strength steels. Technical Data: Packing unit: 5 pcs. Dimension: 44 mm Diameter: 8 mm Material: HSS plated Specifics...

For spot weld removal on high strength steels. Technical Data: Packing unit: 1 pc. Dimension: 44 mm Diameter: 8 mm Material: HSS plated Specifics:...

Spot weld remover; universal for all cars. Especially designed for wide and deep profiles. Removes and opens spot-welds at the folds as well as se...

The new premium shielded arc welding device VAS 821 003 is the best solution for car body repair shops. Features: It helps you carry out high-qual...

The VAS 882 005 Milling Edge Cutter was developed for cutting beaded edges, laser weld seams and for process-reliable and precise car body outer sk...

The Vac-U-Pull Extension Kit is a valuable enhancement for performing dent repairs on taller vehicles such as trucks and delivery vans. This extens...

To remove self piercing rivets. It is made out of tungsten-carbide (extra strong).

To remove self piercing rivets (SPRs).

Violet Oval Suction Cups Ø 33 x 47. Packing Unit: 10 pieces.

Violet Round Suction Cups Ø 40. Packing Unit: 10 pieces.

Warning Bollard – 6 Cone Kit with Barrier Chain. High visibility conical warning bollards to alert of the high voltage hazard presented by Hybrid o...

Approved and tested by Volkswagen AG. The WDT-250 cleaning device is used to clean the water drains on the sunroof. Soiling caused by leaves or ot...

The Airopower wedge head is used for pointed areas, bars, and corners.

Weld Caps Female for i4s, i4, and PHS-101 Spot Welders. Pack of 15.

Gas-Shielded Welder for steel and aluminum welding - tested and approved by Honda, TESLA, and Acura. VW version is also available. This welding mac...

The Union X96, with a diameter of 0.8 mm, is a high-strength MAG welding wire with Honda approval. With a nominal strength of 980 MPa (142 ksi), it...

The DF-WA202 Wheel Arch Clamps are used to clamp the hard to reach access points like a wheel arch. Quick & Easy Can be set up in under a secon...

A basic tool for painting rims, with four such cones situated on a panel stand (e.g Single Wheel Rim Holder, Sanding Table, EasyFlex, and MultiFlex...

Wheelhouse Electrode for i4 Spot Welders | PS-1133-5/8 Diameter is 5/8".

To be used with the Screw in Shank Replacement for i5 - Wheelhouse Arm Assembly | SA-5002.

i4s, i5s, and i5 Smart spot welders wheelhouse electrode washer, Ø1.394".

For best results, please use these glue sticks with the Miracle System Glue Kit. Packing Unit: 15 pieces.

For Rocker Panels or other similar tasks. DF-507TK: 1Lb thick Wiggle Wire (3/32") .93mm, 12 gauge, approx 30 pieces. Made in the USA.

For crease pulling and other similar tasks. DF-507: 1 Lb thin Wiggle Wire .062, 1/16", 16 gauge, approx 60 pieces. Made in the USA.

Technical Data: Packing unit: 1 pc. Material: Aluminum, plastic

Technical Data: Packing unit: 1 pc. Material: Aluminum, plastic

Technical Data: Packing unit: 1 pc. Material: Aluminum, plastic

Brochure | Component List | Instructions All-In-One Tool for Quick and Quality Glass Repairs. The Windshield Repair Kit (PRO-WRK) is a new, easy t...

Wire Feed Roller for Aluminum 0.8-1.0mm (0.030 - 0.040 in.). Two rollers are required and the listed price is for each.

Wire Feed Roller for Aluminum 1.0-1.2mm (0.040 - 0.047 in.). Two rollers are required and the listed price is for each.

Wire Feed Roller for Steel Size : 0.8mm - 1.0mm (0.031 - 0.039 in.). Two rollers are required and the listed price is for each.

Wire Feed Roller for Steel/ Silicon Bronze 0.6-0.8mm (0.024 - 0.031 in.). Two rollers are required and the listed price is for each.

Wire Feed Rollers for Steel 0.8+1.0mm for Wielander and Schill InvertaPuls MIG Welders. Technical Data: Material: Steel Packing unit: 2 pcs Dimens...

The wire insertion tool is an accessory for the roll out 2000 car window repair system.

Technical Data: Material: Steel Packing unit: 2 pcs Dimension: 12.1 mm Diameter: 37 mm

Technical Data: Material: Steel Packing unit: 2 pcs Dimension: 12.1 mm Diameter: 37 mm

Companion quarter glass panel removal system. Designed for safe and efficient side glass panel extraction. Small form factor allows for use in wide...

The WRD Base Handling Cup is an essential tool in window tinting and auto glass repair. Boasting multi-purpose functionality, this cup is an ideal...

13″ x 6.5″ (330*165 mm). Unique design provides optimal protection to interior of vehicle.

16″ x 9.5″ (410 x 240 mm). Extra large design for dash protection of larger vehicles.

6" x 2" (150*55 mm). Pack of 10 moulding protector sheets. Designed with three different corner radiuses and one sharp corner edge. Helps protect m...

Required by BMW Video for Quarter Glass Removal Cutting fibre line removal system. Provides safe and efficient auto glass panel removal. Features:...

One person auto glass panel setting system. Provides a safe and efficient setting solution. Features: Interchangeable attachment locking mechanis...

The WRD Tap Knife is a quick quarter-panel urethane cutting knife. Features: Speedy pre-cut prep for quarter panels High-quality carbon steel blad...

Replacement metal roller for the Spider 4 and Spider 3 cup assembly.